Platinum Acqua - Water Based Sealant

DESCRIPTION

Anti-stain water based impregnator treatment.

PLATINUM ACQUA penetrates the surface of the stone creating an invisible barrier protection against stains: oil, grease, general dirt, mould, mildew and smog.

Product will not change the natural aspect of the stone or create any type of film, allowing permeability vapour moisture to escape, and is UV- resistant.

- Suitable for marble, granite, natural and enineered stone, volcanic stone and low absorbet surfaces.

- Natural finish for interior and exterior use.

- Suitable for flooring, work surfaces and facades.

- Odourless.

- Non Toxic Enviromentally friendly.

- Can be applied on damp surfaces.

PLATINUM ACQUA IS “FOOD CONTACT CERTIFICATED”

APPLICATION

Apply PLATINUM ACQUA with brush, cloth, spray or professional method.

In case of over treatment or any air bubbles remove by wiping excess product using a clean cotton cloth or absorbent paper.

All stone surfaces must be clean and dry.

Apply one coat of PLATINUM ACQUA evenly by spraying using a low pressure pump up garden spray type unit (most efficient method) or with a lamb’s wool applicator or by cloth in circular movements and allow to dry for approx. 4-6 hours. On very absorbent surfaces second or third coats may be required allowing sufficient time between each additional application (1-3 hours) to penetrate into the stone and dry.

Temperature of surface to be treated should not be below 10ºC.

Avoid direct sunlight especially for external works.

ADVICE

To maintain treatment using PLATINUM ACQUA every 6/12 months.

Apply manually or with cotton cloth PLATINUM ACQUA diluted 20% in water for kitchen and bathroom.