Breton MultiCut TC-TD Automatic cutting line with software

MULTIBRETON TC-TD - AUTOMATIC CUTTING LINE WITH SOFTWARE OPTIMISATION

For plunge-cutting granite and marble slabs, the line consists of two machines positioned in sequence, the MULTIBRETON TC longitudinal saw and the MULTIBRETON TD cross-cutting saw, which work simultaneously thus guaranteeing high productions.

Depending on production requirements, it is possible to vary the number of cutting spindles. The working cycle is fully automated and can be programmed from the control panel which is provided with colour “touch-screen” monitor and technologically advanced software featuring a user-friendly interface. Upon request this cutting line can be supplied with a software option for optimising cutting operations.

MULTI-BLADE LONGITUDINAL SAW

The MULTIBRETON TC cuts the slab which travels on the conveyor belt mounted on side guides. This system ensures the perfect parallelism of each single cut.

CROSS-CUTTING SAW

The MULTIBRETON TD cuts the slab as the spindle holding beam advances at a right-angle to the conveyor belt. The beam travels at a perfect right angle on guides enclosed in an oil bath and protected by a labyrinth seal casing.

Beam motion is controlled by an inverter-controlled motor and two trapezoidal screw synchronised by a shaft. A pusher/aligner for squaring up the strips before cutting is installed at the front end of the machine. This system guarantees the perfect geometry of right-angled workpieces.

Parameters	Unit	200/TC/350	200/TD/350
Overall machine width	mm	6500	6500
Max. length of slab	mm	3500	3500
Belt advancement power	m/kW	1.1	7.5
Water requirements for each spindle	l/min	150	250
Overall machine height	mm	2130	2300
Spindle-holding beam speed	m/min	-	0.5÷8
Machine weight	kg	9000	15000
Max. blade diameter	mm	360	360
Min/max. belt advancement speed	m/min	0.2÷4.0	10÷35
Average level of equivalent sound pressure	dbA	84	85
Max. number of spindle units	nr	7	12
Min. distance between the blades	mm	200	200
Overall machine length	mm	3710	4200
Useful working width	mm	2200	2100
Average level of sound power	dbA	101	110
Motorized spinale units displacement speed	m/min	0.2÷1	0.2÷1
Spindle unit motor power (marble/granite)	kW	7.5	7.5
Spindle-holding beam motor power	kW	-	3
Max. working slab thickness(marble/granite)	mm	70÷40	70÷40
Spindle units displacement power	kW	1.1	1.1