Monofil BM 2300 single wire machine for squaring blocks

Monofil BM 2300 single wire machine for squaring blocks

The single wire machine is perfectly suitable for squaring blocks or cut very big thickness slabs, installing one diamond wire.

The machine is supplied with a fixed trolley for the blocks, in order to cut big thickness slabs; otherwise the machine is supplied with a rotating bench trolley, in order to square the marble blocks.

The structural construction of the diamond wire frame saw is made in two uprights columns, connected together with a cross steel structure. The MONOFIL BM 2300 machine installs two flywheels of Diameter 2300 mm.

Frame used to square off blocks of marble or granite and saw very thick blocks.

Flywheel:

On the sides there are two load-bearing uprights where the flywheel supports slide. A gear motor with inverter turns the flywheels at a constant speed of 37 metres per minute, or at a variable speed ranging from 5 to 37 metres per minute. The wire is tightened using

a hydraulic cylinder managed by a control unit which, if the wire breaks, automatically stops the machine.

* The useful sawing dimensions can be varied upon request of the customer

Parameters	Unit	Monofil BM 2300
Machine Width (W)	mm	9250
Machine height (H)	mm	6000
Approximative Weight	kg	9700
Installed electrical power	kW	4
Working lowering speed	mm	0 ÷ 2.000
Dimensions of turning trolley	mm	2300x2300
Main motor power	kW	25
Diamond wire linear speed	mt/minute	5 ÷ 37
Diamond wire length	mm	21000
Block max. cutting height	mm	2200
Machine length (L)	mm	6000
Block max. cutting width	mm	4000
Length of rail coupling for trolley	mm	3000x2300