Mobile single wire saw for squaring and cutting thick slabs

TRIMWIRE harmonizes the advantages of a stationary machine with a mobile quarry machine.

Very unique, it is composed of a single wire structure installed on a tracks vehicle equipped with a diesel engine that makes the system independent from any external energy source.

The machine is designed to be easily configured for transport from quarry to quarry on trailer.

Once the machine has been stabilized on the side of the block by 4 hydraulic stabilizers, the cutting arch is brought to the desired height and opened to align the wire to the face of the block to be cut.

The cut is performed vertically thanks to the movement of the arch structure along the column.

The wire is driven by a motor flywheel 1000 mm diameter and guided by 600 mm diameter wheels.

The entire cutting structure can also move along the rails (4 meters) placed on the top of the vehicle to allow the realization of different thicknesses with a single positioning of the vehicle.

All the drives are hydraulic and the main controls are operated by radio control device.

Total weight:7 tons

Translation speed on tracks low/fast:1,2 km/h - 2,3 km/h

Superable slope in autonomous movement:

30% (17°), in velocità lenta / in low speed

Angle of inclination limit of lateral tilting with machine in autonomous movement:35% (20°)

Diamond wire speed:up to 40 mt/sec, adjustable

Maximum sizes of the workable block:Width 3,8 mt; Height 2,5 mt

Maximum distance of the second parallel cut:max 4 mt

Diesel motor: 18,5 kW

Lenght of the diamond wire: 16,4 mt

Diameter of the diamond wire: 8,3 mm or less

Parameters	Unit	TRIMWIRE
Machine height (H)	mm	3043 to 5876
Approximative Weight	kg	7000
Machine Width (W)	mm	2318
Block max. cutting height	mm	2500
Maximum distance of the second parallel cut:	mm	max. 4000
Diamond wire linear speed	mt/minute	up to 40, adjustable
Machine length (L)	mm	8862
Block max. cutting width	mm	3800
Translation speed on tracks low/fast	km/h	1.2 to 2.3
Superable slope in autonomous movement		30% (17°)
Diamond wire length	mm	16 400
Diamond bead maximum diameter	mm	8.3 or less
Main motor power	kW	18.5