QD Self-undercutting Middle Duty Anchor Bolt

QD Self-undercutting Middle Duty Anchor Bolt
Applicable for:
Concrete (Grade C15)
Natural stone
Solid brick wall
Hollow brick wall
Aerated brick wall
Range of use:
Steel structure
Curtain wall
Railing
Cantilever bracket
Cable tray
Mechanical equipment
Elevator
Stair
Door & window

Description of the product:
1. Pre-insert self-undercutting heavy duty anchor bolt
2. Drill a hole at a time with a universal drill.
3. Slightly tap the anchor bolt with a hammer to put it to its effective depth. When fastened with the nut of the anchor bolt by a spanner, the upper and lower self-undercutting positions will cut the bottom in two ways. At two self-undercutting positions, the anchor bolt is fixed on the base material in trapezoid fastening status. At this time, the bolt obtains fastening force in two ways.
4. Grade 6.8 for carbon steel SS A2-70 and A4-70 products are available and anchor bolts manufactured under special requirements can also be supplied.

Advantages of the product:
1. The anchor bolt will be anchored in two ways with excellent aseismatic performance and high security assurance.
2. The action directions of the anchor bolt at two self-undercutting positions are adverse, which may offset the expansion strain and result in small edge distance for anchoring.
3. ( In comparison with chemical anchor bolt) Upon the completion of Installation, the anchor bolt can immediately bear maximum design load without waiting.

Installation of pre-insert ( anchor bolt of QD type)
Step 1. Drill and clear dust
Step 2. Plug in anchor bolt
Step 3. Fix the anchored component part
Step 4. Tighten the anchor bolt screw nut.