Home
Stone Shop
Shopping Cart
Suppliers
Products
Stone Library
Stone Fair
Post Need
Message
Favorites
Get App
Logout
garnet sand, steel shot, steel grit, steel cut wire shot, abrasive, blasting
garnet sand, steel shot, steel grit, steel cut wire shot, abrasive, blasting
Description:
We have more than 10 years experience of garnet sand production and sale. Our garnet Is rock type garnet mined from natural garnet rocks 200 meters underground.
20-40 and 20 ~ 60 Mesh: It is the most cost effective and excellent abrasive of its kind.
Its repeatability makes it suited for fast efficient removal of existing coating when compared to the other traditionally used abrasive medium.
Chemical analysis for single mineral of garnet
|
Oxide |
SiO2 |
Al2O3 |
TiO2 |
Fe2O3 |
P2O5 |
CaO |
MgO |
MnO |
|
Content (Wt %) |
35 |
21 |
1 |
31 |
0.05 |
1.5 |
8 |
0.5 |
Applications
12/40 Mesh: One of the most preferred products for multi-media-water-filtration systems.
It can also be used for specialized application where excessive surface profiling is required or very high built coating systems are to be removed.
Surface Profile: 100-150 microns.
20/40 Mesh: It is an abrasive that can be utilized for heavy-duty coating removal.
It's recyclability and a nominal production rate makes it one of the most preferred repair-grade abrasives.
Surface profile: 75-100 micron.
20/60 Mesh: It is the most cost effective and excellent abrasive of its kind. Its repeatability makes it suited for fast and efficient removal of existing coatings when compared to other traditionally used abrasive medium.
Surface profile: 50-90 microns.
30/60 Mesh: It is perfect for all types of blasting applications including, removing existing coating, rust and other contamination. it is an ideal choice for superior surface preparation for new steel prior to tank coating, for pipelines-both internal and external, fabricated steel and structures, etc. Also used for effective removal of mill scale, it is the most preferred as a Slurry- Blast Grade and High Pressure
Hydro-Blasting Abrasive.
Surface Profile: 50-75 microns.
80 Mesh: Possessing highest efficiency on new steel/mill scale due to highest grain count per weight/volume makes it an ideal choice for surface preparation of Aluminum and non-ferrous surfaces.
120 Mesh: Utilized for surface preparation of stainless steel and Aluminum where minimum surface roughness is desired, this abrasive medium can be used on a variety of pliable and synthetic products too.
