All Black Mc Standard Treatment for Black Granites

Standard treatment for black granites

Features

ALL BLACK MC has been formulated as a medium-long drying pigmented impregnator to be used in line with a standard process.
The manufacturing process involves the use of ovens in order to be able to easily carry out the drafting of the product. The treatment can be carried out by stacking the slabs one on top of the other, spacing them by 1-2 centimeters with inert material. The use of wood and absorbent materials that can leave residual whitish stains should be avoided.
To facilitate the operations, the oven is used which is normally used for resin finishing.

Materials

Application procedure

Granite slabs must be sanded to 800 or 1200 grit depending on the material.
It is essential to run a sample to identify the exact porosity. Keeping the slab flat, ALL BLACK MC is applied (with a short-haired glaze roller) in a uniform way, passing over the surface several times so that the application is perfectly black and homogeneous. Then, the plates will be loaded into the oven which must have a constant ventilated temperature of 28 max 30 ° C.
The fans must remain on even if the temperature of the oven is lower than that of the laboratory to allow uniform drying of the pigment of the surface of the plates, avoiding halos and different shades.
The slabs will remain in the oven for at least 24 hours, then unloaded and, always stacked, they will have to catalyze for another 24 hours. The perfectly dry and catalysed substrate of the slab will take on a black-brown color with light opaque burnt-red reflections. The slabs will then be cleaned to remove sooty residues and polishing.
Cleaning is done using carbide brushes.

Tools

Yield

The yield of ALL BLACK MC is about 20/25 gr / m².