DF 2000-2500-3000-3500 Single wire saw for blocks, slabs

DF 2000-2500-3000-3500 Single wire saw for dressing blocks and cutting slabs

TOP INVERTER OR FIXED WIRE SPEED

Single wire saw for dressing blocks and cutting slabs. Has two main flywheels of large diameter (250 or 200 cm as to the maximum cutting height needed) to maximise the cutting speed and the life of the damond wire. The wire tensioning system is hydraulic.

Stiff metallic structure can carry flywheels of diameter either 2000 or 2500 mm.

Electronic drop speed control. The machine uses only two large flywheels (diameter 2000 or 2500 mm) thus reducing wire fatigue. The switchboard is separate from the machine, and includes a number of safety devices with segnalations of eventual anomalies of the cut. Diamond wire tensioning uses one of the two flywheels thanks to an hydraulic piston.

The TOP version has an inverter to adapt the wire speed to the type of stone to be cut. The basic machine has fixed wire speed, set for the material to cut

Parameters	Unit	DF 2000 TOP	DF 2000 1VM	DF 2500 TOP	DF 2500 1VM	DF 3000 TOP	DF 3500 TOP
Main motor power	kW	30	30	30	30	30	30
Cooling water requirements	l/min	15-30	15-30	15-30	15-30	15-30	15-30
Approximative Weight	kg	5200	5200	6000	6000	6700	7300
Machine height (H)	mm	6000	6000	6200	6200	7300	8950
Machine Width (W)	mm	3500	3500	4200	4200	4400	5540
Diamond wire length	mm	19.700-21.700	19.700-21.700	21.300-22.900	21.300-22.900	21.300 - 23.400	24.900-27.100
Machine length (L)	mm	10.000	10.000	10.300	10.300	10.300	12.000
Diamond wire linear speed	mt/minute	0-40	30	0-40	30	0-40	0-40