Old Age Reviver/Enhancer, Strengthener with Oil and Water Proofing Effect

OLD AGE is a further update of the range of the sealers and protecting agents with reviving effect. The product, conveyed by solvents of slow evaporation, making any film in surface, penetrates in depth also into the smaller micro-porosities of the materials and grants to the treated support a multiplicity of effects: - WET and ENHANCING EFFECT: not turning yellow, stable to the atmospheric agents; - PROOFING EFFECT: water and oil repellent with development of an anti dirt barrier, but keeping unchanged the natural transpiration of the treated materials; - STRENGTHENING and ANTI POWDERING EFFECT: its binding and cross-linking characteristics and the nature of the contained polymers that are fixed permanently to the treated materials. FUNCTION Wet, enhancing, proofing, protecting, strengthening and anti powdering effect. Permanent reviving and protection of the treated surfaces. LINE PROTECTION PROFESSIONAL INDICATION It develops a permanent and anti dirt protecting layer, anchored into the pores of the material, that revives and enhances the shade of the material and waterproofs and strengthens its structure. The higher reviving effect is obtained when applied to polychrome surfaces. MATERIALS ANY KIND OF STONE AND POROUS MATERIALS, AND PARTICULARLY ON POLISHED or/and UNPOLISHED SURFACES, GRINDED/HONED SURFACES. NOT SUITABLE FOR WHITE OR VERY LIGHT COLOUR MATERIALS HOW TO USE Preparing the surface. Clean carefully the surfaces to be treated that must be dry, absorbent and free from alien and greasy substances or friable parts. Application: Apply with clean cotton cloth or tampon and rub to help the penetration. Let the product work 10 to 15 minutes and then, with other clean and dry cotton cloth, always remove the eventual excess of not absorbed product before they dry on the surface in order to avoid halos and opacities impossible to remove once dried. Attention. Never walk on the treated surface until it is completely dry (24 hours, suggested). OLD AGE is ready to use and it highly concentrated and normally it is not needed a second application. Always apply a limited quantity of product and evaluate after 24 hours if it is needed a further intensification. To enhance the effect, after the complete drying, it is possible to polish the surface buy using a single-brush machine fitted with polishing felt TEST The product is very difficult to remove, so, before the application it is always necessary to make a preliminary test to evaluate the compatibility of the product with the material, the obtained effect after drying and to have the prior approval of the client. COMPOSITION MIXTURE OF FUNCTIONALIZED POLYMERS IN ORGANIC SOLVENTS. TECHNICAL DATA EVAPORATION OF THE SOLVENT: 30 to 60 minutes (according the environmental conditions)ESTIMATED AVERAGE CONSUMPTION: 100 to 200 g/m² (according to the porosity of the material). NOTE SOLVENT BASE PRODUCT: WEAR IMPERMEABLES GLOVES AND SAFETY GOGGLES AND APPLY IN WELL AIRED ROOMS. KEEP OUT FROM THE REACH OF CHILDREN FOR MORE INFORMATION ABOUT SAFETY CONSULT THE MATERIAL SAFETY DATA SHEET.