acrylic, polyurethane sealant, epoxy sealants, Stone adhesives, abrasives, waxes, Sealers and impregnators
acrylic, polyurethane sealant, epoxy sealants, Stone adhesives, abrasives, waxes, Sealers and impregnators
WATER REPELLENT FOR STONES, CONCRETE, BRICKS, PLASTERS
SUITABLE FOR INFILTRATIONS AGAINST
THE CLIMBING-UP OF THE HUMIDITY INSIDE THE WALLS
AQUA STOP NATURA is a colourless aqueous emulsion of highly alkylate silicon resins, able to develop a strong water repellent effect, stable during the time, on the absorbing mineral materials used for building. It makes a strong, but transpiring, barrier against the aggressiveness of the atmospheric agents and it is particularly effective, by means of injections inside the walls, against the climbing-up of the humidity. The product is easy to apply and ready to use (do not dilute by solvents nor by water).
COMPOSITION Mix of Siloxanes and water
PROPERTIES It develops quickly an effective water repellent barrier - UV rays stable - protective - transpiring - on the mineral stone supports even if humid. The active substance of the product has: • Good penetrating capacity; the treated material is well protected also in depth. • High resistance to alkaline environments; the product is suitable for all kind of concrete and, in general, for most materials commonly used by the building industry. SUITABLE SUPPORTS CONCRETE (all kind commonly used), MINERAL PLASTERS, FIBRE-CONCRETE PANELS, SILICEOUS-CALCAREOUS SIGHT-BRICKS, MINERAL BASED NATURAL AND ARTIFICIAL STONES DO NOT USE THE PRODUCT TO WATERPROOF GYPSUM OR GYPSEOUS SUBSTANCES DO NOT APPLY Do not apply: - in areas subject to water under pressure (basements, ditches, swimming pool ends), - on surfaces of gypsum or synthetic material (plastics, synthetic plasters or synthetic paints), - in case of adverse atmospheric conditions (temperatures lower than 5°C741°F or higher than 35°C/95°F - when outdoor in case of coming rain, over ventilation, etc.)
PREPARING THE SUPPORT The surfaces to be treated must be porous and absorbing, free from manifest and clear humidity stains and free from dust, traces of greasy substances, saline efflorescence, mould, etc… CLEANING THE SUPPORT in presence of oils, grease, greasy parts, smog → wash by NEUTREX in presence of moulds, vegetative parts → wash by BACTEX in presence of dust, friable parts → remove by compressed air AFTER CLEANING THE SURFACE, THE PRODUCT CAN BE APPLIED EVEN IF THE SURFACES ARE HUMID