Idrostop Terrazza- Water Repellent, Strengthener Transpirant for Balconies, Terraces

IDROSTOP TERRAZZA- WATER REPELLENT, STRENGTHENER TRANSPIRANT for balconies, terraces

Fissures because of the adjustment of the floor, the frost, the bad or not correct maintenance can cause water infiltrations in balconies and terraces of natural stone, grès, clinker, terracotta, cement and concrete and can be cause of damage to the flooring and to the underlying structures. IDROSTOP TERRAZZA, based on special elastic resins resistant to water and alkali, • Waterproofs the micro-cracks and the grouts of the flooring in balconies and terraces • Efficaciously opposes to the infiltration of the water that can be stagnating on the surface • Prevents the formation of mould and efflorescence • Prevents eventual damages to the structures, caused by the infiltration of rinsing or rainy water • Increases the compactness of the surface by penetrating inside the structure of the materials. • It is periodically re-applicable according to the need FUNCTION WATERPROOFING PROTECTION LINE BUILDING AND CONSTRUCTION INDUSTRY PROFESSIONAL INDICATION PROTECTION AGAINST THE PENETRATION OF THE WATER INTO THE MATERIAL AND GROUTING MATERIALS MARBLE, GRANITE, NATURAL STONES, GRES PRCELAIN TILES, KLINKER, TERRACOTTA, CEMENT HOW TO USE Preparation of the surface The surface must be well washed and cleaned, free from greasy substance and any kind of alien substance and friable parts. Application of the product Wait until the material is completely dry and after apply the product evenly on the surface, by crossapplication, by using a non-coloured clean cotton cloth or a paint brush. Saturate well the grouting and the cracks of the floor. Wait a few minutes to let the product penetrate the porosities and the cracks of the material and than with another clean cloth dry the surface and remove any excess of unabsorbed product. On very absorbing materials, apply a second coat 24 hours after the first application. The surface can be walked 24 hours after the final application. The product can initially emphasize the shade of the material. Attention! During the application and during the first 24 hours do not walk on the surface specially with shoes with rubber soles because they may leave marks.

TEST Before the application always effect a preliminary test on a small part of the surface and evaluate the compatibility of the product with the material and, 24 hours later, the protecting effect COMPOSITION MIX OF RESINS AND SOLVENTS

TECHNICAL DATA Estimated consumption: from 8 to 15 sq.m. per litre each application and according to the absorption degree of the material. Apply at temperatures between +5°C and + 35°C (41°F and 95°F)