stone chemicals, sealants, anti-slip coatings, polishing adhesives, epoxy resin, waxes, detergents
stone chemicals, sealants, anti-slip coatings, polishing adhesives, epoxy resin, waxes, detergents
Product with “ageing effect” for marbles, sandblasted pebbles and coloured bush hammered materials
APPLICATIONS
ANTIQUE STONE WET is a very new product giving an ageing effect. Marble and cobblestones which have been sand-blasted and bush-hammered treated with ANTIQUE STONE WET acquire a lasting warm, antique look.
ANTIQUE STONE WET brings out the tones of materials and its satin shine appears like the precious remains of polish which has consumed by time.
HOW AND WHY TO USE
ANTIQUE STONE WET does not form a film and should be applied to surfaces which are dry,clean and free from dust and grease. Using a brush, pad or clean cotton cloth, rub softly in order to facilitate penetration. We recommend to apply ANTIQUE STONE WET already in the workshop or on materials already laid indoors. In order to reproduce the ageing effect on the surfaces, apply a thin coat of the product and rub in evenly using a soft clean cloth. In order to obtain a slightly polished satin finish, wait for 24 hours after initial treatment and then go over using a single brush polishing machine with a soft felt disk turning at 330/350 rpm. After 3/4 days, depending on the humidity, the surface can be walked on.
COVERAGE
Approx.10-12 litres every 100 sq. m. according to the material
porosity and the desired look.
N.B.: In doubtful situations make a sample test to check if the
desired effect can be obtained.
WARNINGS
Refer to the MSDS available upon request.
PACKAGING
Can of 1 lt. Box of 12/24 pcs
Drum of 5 lt. Box of 6 pcs.
Tank of 10 lt/25 lt
HANDLING AND STORAGE
The product must be stored in the original containers, perfectly sealer, at a temperature between 0 and 25°C and shielded from direct sunlight in ventilated area.
In these conditions, the product has a self-life of 12 months of the date quoted in the delivery note. If the material has been stored for longer than its recommended selflife, it might still be suitable, but this has to be determined beforehand by performing quality checks on its application-related properties.
LIMITS OF RESPONSIBILITY
We decline all responsibility for work, damage or storage which might result from improper or incorrect use of the product or inadequate storage. The indications supplied with our product specifications and instructions for use are the results of accurate laboratory tests and experience in the field. However, as it is not possible to forward other evidence, when the products are used, these indications shall not be binding and do not imply liability on our part.
As well as following good working practices, before applying the product we recommend you read the safety recommendations and the directions on the package.
For the best professional results, it is advised to test a small area first, for compatibility with the surface to treat and the desired effect. This preliminary testing is also useful to determine the consumption according to the characteristics of the material the product will be used for and to the type of processing. The reproduction, even partial of this product sheet is forbidden.
The data refer to the standards in force at the time of printing,2016.
The company reserves the right to make any changes without notice.
PRODUCT FOR PROFESSIONAL USE