Imprim Rtf Colour Correctors

Imprim RTF

Darkening treatment for marbles Black Marquinia and granites like Black Africa, red, green. Excellent as toner for materials that have been lightened after smoothing

APPLICATIONS

IMPRIM RTF Corrector is a product which, with the addition of special pigments, is used to darken black marbles and granites such as: Africa Black, Zimbabwe Black, green marbles and granites type: Alp Green, Guatemala Green, red marbles and granites, and dark granites in general, giving these a wet look, livening up the colours for many years and restoring even the most faded colours. Its application livens up colour tone in all those materials with little or inadequate natural colour and where a quality surface corrector is required. The product reduces surface faults such as the slight marks that develop during the smoothing and/or polishing of marble, granite and natural stone surfaces.

IMPRIM RTF Corrector can be used on all stone surfaces to bring to light even the most faded colours and recover and renew worn surfaces (such as floors, stairs, window-sills, balustrades and tables, etc.) because the special features of this product enhance colour and at the same time strengthen the surface structure. The product is stable under UV rays and is therefore also recommended for outdoor use.

HOW TO USE

The product corrects any surface faults in marbles, granites and natural stone of the "polished type" in a natural and long-lasting way. Shake the container well before using, because the pigments tend to deposit on the bottom. The surfaces to be treated must first of all be cleaned and perfectly dried. Apply the product with a short-haired roller and with a clean soft-cotton cloth, spreading it evenly. Avoid excess product stagnating and drying on the surface. Wait 24 hours to permit absorption and then remove all excess product from the surface using a home polishing machine or brush equipped with felts or fine steel wool disc. If necessary, repeat the treatment operation by applying a second coat in the same way as the first. The product does not form a film and several coats can be applied. Before applying the second coat, it is not strictly necessary to wait 21 hours before removing excess product. This can in fact be removed after 4/5 hours from application using the brush equipped with felts or fine steel wool disc. Do not use water until 96 hours have passed from treatment with " IMPRIM RTF".

PRECAUTIONS

Product application is irreversible and once applied it cannot therefore be removed. For better professional use, always perform a preliminary test in a small hidden area to check product compatibility with the desired effect and determine consumption.

WARNINGS

The MSDS is available upon request.

PACKAGING

Bottle of 1 lt. Box of 12/24 pcs Drum of 5 lt. Box of 6 pcs. Drum of 10 lt/25 lt/200lt