stone chemicals, sealants, anti-slip coatings, polishing adhesives, epoxy resin, waxes, detergents
stone chemicals, sealants, anti-slip coatings, polishing adhesives, epoxy resin, waxes, detergents
Anti-stain water-and-oil-repellent suitable for kitchen worktops, bar counters,bathroom tops made of marble, granite, marble agglomerates and “polished” or“unpolished” natural stones
APPLICATIONS
FPR-208 is a specifically formulated anti-stain product to protect surfaces against water, oil,burned oil, fat, food, stains; the product resists alkaline detergents, ink, etc.
Used in treating kitchen worktops, bar tops, bathroom tops and marble fixtures, tables, doorsteps, windowsills, granite, marble agglomerates and polished or rough natural stone. By priming with FPR-208 a waterrepellent barrier is created thus stopping dirt penetrating in-depth and making cleaning and ordinary maintenance easier.
N.B.: FPR-208 is not resistant to alcohol drops, citric acids, Coke, lemon, vinegar, etc; any such stains should therefore be removed immediately.
HOW TO USE
Dilution: to be applied undiluted, ready-to-use product.
Application: Clean surfaces to be treated very carefully, making sure they are not damp. Spread the product evenly on the parts to be treated using a clean cotton cloth or brush. Apply a first coat, let it dry, after about 30 minutes rub it over with a dry cotton cloth or a felt pad.
The product can be removed using fine steel wool. For maximum results, we recommend repeating the operation once or twice, leaving a few hours between each coat. Before applying a further coat,remove any excess from the previous one. We recommend to apply on tops a thin coat of neutral beeswax every 20-30 days and polish using a soft cloth after a few hours. In this way a stronger protection against citric acid, soap or perfume stains, etc. will be guaranteed. The water-oil repellent barrier against greasy stains is had 24 hours following treatment.
Before applying FPR-208, test product on a small portion of surface to check for any possible alteration in colour.
COVERAGE
1 litre every approx.10-12 sq. m. per coat, depending upon surface porosity.
WARNINGS
Refer to the MSDS available upon request.
PACKAGING
Can of 1 lt. Box of 12/24 pcs
Drum of 5 lt. Box of 6 pcs
Drum of 10 lt/25 lt.