Black -Half Polishing Black Wax for Black Slates

Supplier Detail
Federchemicals s.r.l.
Established: Dec 31,1962
Italy Italy
Main Product:

stone chemicals, sealants, anti-slip coatings, polishing adhesives, epoxy resin, waxes, detergents

user img
Mr.Federico Ravelli
Tel: +39-030 3385578
Adr: Via G. Borsi, 2 - 25128 Brescia - Italy
Visit Store
Product Description

BLACK

Liquid compound detergent with a slightly alkaline base (PH around 8-9) for cleaning and upkeep of all hard and resilient floorings (made of porcelain stoneware, ceramic, marble, granite, marble agglomerate, natural stones, synthetic material, cement, etc.).

Half-polishing black wax for the protection and the maintenance of black slates and for black rubber floors

APPLICATIONS

BLACK is composed of acrylic and polyethylene emulsions, carnauba waxes and hard microcrystalline waxes. BLACK does not contain solvents; when applied it forms a flexible film. BLACK is a very powerful, self-glossing product with excellent long lasting dirt proof properties. It contains special dyestuff and is specifically suitable for application on all resilient black rubber floorings (such as striped rubber floors). BLACK can be applied to restore surfaces made of slate which faded owing to repeated cleaning with acidbased detergents. H

OW AND WHY TO USE

Dilution: BLACK should be used undiluted

Application: The first application should be made on a perfectly clean and dry floor, after which it is recommended to apply two crosswise coats leaving 2-3 hours between one and the other, using the mop or a cloth. Allow to dry, then polish with the floor polisher or a wool rag. (N.B.: It is not absolutely necessary to polish). For initial treatment, clean the floor carefully applying the wax remover DEC diluted 1:10 or 1:20 ratio in water. N.B.: It is possible to remove the product using the de-waxer DEC to be diluted in water at the following ratio: 2 litres of product and 5 litres of water. Rinse thoroughly and vacuum. For maintenance: It is recommended to apply the product in a very diluted ratio (1:30) with water.

COVERAGE

3-4 litres per 100 sq.m. per coat, according to the absorption degree of the surface.

WARNINGS

The tinned product cannot stand frost at /10”C. temperatures S 2: Keep out of reach of children

PACKAGING

Bottle of 1 lt cartons of 12/24 pcs Tank of 5 lt cartons of 6 pcs. Tank of 10 lt Tank of 25 lt

Categories:
Related Searchs: