stone chemicals, sealants, anti-slip coatings, polishing adhesives, epoxy resin, waxes, detergents
stone chemicals, sealants, anti-slip coatings, polishing adhesives, epoxy resin, waxes, detergents
Special wax based on Brazilian Carnauba and natural beeswaxes of high quality for marbles, granite and natural stones.
APPLICATIONS
LUX is a paste wax formulated with very precious natural waxes dispersed in organic solvent to cure and protect marble, granite, natural stones, agglomerates (grits, Venetian mosaics, terrazzo). LUX is a very fine wax obtained by mixing the best Brazilian carnauba and beeswaxes; it guarantees marble and granite floors longlasting protection meanwhile they maintain their natural shine. It creates a dirt-repellent barrier and increases the beauty of the surfaces. Pure beeswax, one of the precious ingredients of product, besides oil of turpentine from pine buds make LUX a perfect wax polish which gives new light to floors.
HOW TO USE
Dilution: to be used undiluted.
Application: LUX paste wax for marble, doorsteps, worktops, windowsills, gravestones, decorations, etc., should be applied 24 hours after the ground coat using LITHOS, PRIMALAS/92, KEOS/928, KERASTONE or IDROBASE 303. Two coats of product should be applied at an interval of 4 to 5 hours between each one. Apply thin an even layer and spread the wax using a normal synthetic sponge, a rag or a flat brush. It is also possible to apply the wax using a single-brush machine equipped with a small heating stove and medium-soft brushes. Allow to dry for a few hours then rub with a dry woollen cloth or felt pad or single-brush polisher fitted with white or beige disks. The floor will soon acquire a beautiful shine. Do not use too much wax at a time: LUX wax has among its main components the purest beeswax that needs to be spread in small quantities to attain the best result. LUX leaves no smears, is dust and humidity repellent, thanks to its waterproofing properties. LUX enhances the quality of the materials meanwhile protecting them against wear.
COVERAGE
Approx. 6 lt per 100 sq.m. per coat.
PRECAUTIONS
The paste wax tends to thicken in winter; we recommend placing the tin in hot water or next to a radiator to restore it to its fluid state. Never heat the product on naked flames. The paste waxes with solvent base are inflammable. The product should be mixed up before use.
WARNINGS
Refer to the MSDS available upon request.
PACKAGING
Can of 1 lt. Box of 12/24 pcs Drum of 5 lt. Box of 6 pcs