Gk 420+ - Gk 320+Chemical Anchor Acrylic Adhesives in Cartridge

CHEMICAL INJECTION ANCHOR EPOXY-ACRYLATE RESIN BASED HYBRID RESIN, STYRENE FREE

quartz reinforced

Chemical injection anchoring system, with added nanotechnologicy components, high performance for fixing heavy loads in building, carpentry, installations, grouting of steel items in general Chemical injection anchor based on epoxy-acrylate resin, suitable for fixing pins, rods, threaded bars, rebar to any kind of stone and brick material and specially to SOLID and HOLLOW BRICKS, CONCRETE, MARBLE, GRANITE, ROCK. Easy to use, it fixes tenaciously and permanently any kind of pin and bar. By penetrating into the structure it increases the resistance and the consistency of the wall and it forms an integral block with the support material; this allows also heavy loads, of course by varying the element to be fixed and the depth of anchoring. The advantage is particularly evident in perforated/hollow building materials where the resin, expanding outside of the appropriate wired bushes (plastic or metal), fills the vacuum zones thus ensuring a highly reliable and economical fastening.

FUNCTION CHEMICAL FIXING AGENTS FOR CARRYING STRUCTURES SUBJECT TO STATIC LOAD LINE BUILDING AND MAINTENANCE PROFESSIONAL INDICATION Stable and durable fixing to building material of any kind of pin, bar, threaded bar and rebar, etc. It doesn’t develop tensions due to the expansion into the base material (support). Suitable also as filling and repairing mass in recovery and restorations.

MATERIALS Building materials in general: solid and hollow bricks, concrete, cement, sandstone, facing bricks, natural and artificial stones, wood etc.

HOW TO USE Drill a hole with appropriate depth and diameter, as indicated by the tables, and clean it carefully removing all trace of dust and friable parts. Before installing the cartridge in the caulking gun, unscrew the threaded cap and remove the pressure cap then screw the static mixer. Put the cartridge into the suitable caulking gun and extrude; eliminate the first grams of mixture to assure a perfect mixing (the colour of the texture must be homogeneous). Extrude the resin into the hole (or wired bush) starting from the bottom and filling it 2/3 of its volume. Then insert the fixing element (threaded bar or pin) rotating it clockwise; the resin in excess must come out. After use remove the cartridge from the caulking gun, remove the mixer. Carefully clean the outlet holes of the cartridge and the pressure cap to avoid any contact between the two components (resin and catalyst). Seal the cartridge re-inserting the eventual pressure cap, and screw the threaded cap.

TEST Testing in a small, hidden area is recommended before the application to determine consumption, hardening time, etc.

COMPOSITION Contains epoxy-acrylate resin and catalyst

TECHNICAL INFO Packaging: coaxial cartridges of 400 ML. and 300 ML. See page 2 for Technical Data

NOTE Contains methacrylic monomer. Apply only in well ventilated area while wearing adequate protection. For further information, see product label or Material Safety Data Sheet. Apply only to clean and dry materials.