Polywhite Sealant/Adhesive, Monocomponent Of High Performance (For Assembly) in Cartridge

DESCRIPTION Monocomponent quick sealant adhesive, based on MS PolymerTM. , hardening by atmospheric humidity, of high initial strength and excellent adhesion. POLYWHITE is able to realize joints and elastic sealing between a wide variety of materials, ensuring the following characteristics: • Not runny, it can be applied on vertical surfaces, • Pratically without shrinkage • Adheres to a wide range of substrates • Free from solvents and isocyanates • Resistant to aging, UV radiation and atmospheric agents • Suitable for booth indoor and outdoor • Flexible to low (-40°C/-40°F) and high (+100°C/100°F) temperatures • Neutral reaction, low odor, non-corrosive • Compatible with many coating systems (it is anyway needed need a test) •

FIELDS OF USE • Installation and sealing of insulating panels, frames, partitions; • Bonding and sealing of panels and wooden profiles (even painted), plaster board, plastic laminate, rigid PVC, brickwork, frames and metal structures; • Bonding of the overlaps between sheets or between metallic elements and other areas over which it is not possible to perform welding or other mechanical fasteners in construction, transportation, metallic carpentry; • Bonding of metal profiles (U) to crystals, sheets of plastic and sheet of metal panels in the industry of the cold materials, refrigerated cabinets, furniture, means of transport; • Bonding and sealing in the installations of air conditioning and ventilation; • Mounting of mirrors; • Bonding of reinforcement ribs on panels of metal sheets or fibreglass and in general of structures subject to continuous vibrations or between materials with different thermal expansions; • Insulation or covering of container or covered vans; • Bonding wood-metal in windows and doors;

CHARACTERISTICS Base material : MS PolymerTM Consistency : pasty Color : WHITE Packaging : plastic cartridge of 290 ml.

TECHNICAL DATA Specific gravity : 1,55 kg/dm3 Hardness Shore A : 55 Modulus at 100% (DIN 53504) : 1,5 MPa Breaking load (DIN 53504) : 500% Shear strength (ASTM D 624-73) : 20 kN/mm Time formation of skin : 10 min. abt. (at 20°C/68°F - 50% R.H) Hardening speed : 3-4 mm / 24h (at 20°C/68°F - 50% R.H) The values shown in the table should be considered as average value and not as specific