Uniseal Neutral Silicon Sealant in Cartridge

Supplier Detail
Industria Chimica General Srl
Established: Dec 31,1974
Italy Italy
Main Product:

acrylic, polyurethane sealant, epoxy sealants, Stone adhesives, abrasives, waxes, Sealers and impregnators

user img
Mr.Alberto Cattini
Tel: +39-059 450991- 059 450 978
Adr: Via Repubblica di S. Marino, 8 - 41122 Modena, Italy
Visit Store
Product Description

UNISEAL adhesive is a solvent-free silicon sealant, recommended for sealing a wide range of materials: NATURAL and ARTIFICIAL STONE, CERAMICS, METAL WINDOWS AND DOOR FRAMES (total absence of corrosives), WOOD, PLASTICS, GLASS, etc. Cures at ambient temperature with neutral and non-toxic reticulation. Suitable for interior and exterior applications, as it confers excellent resistance to atmospheric agents. Easy to apply, it works in a vast range of temperatures -20°C to +40°C (-4°F to 104°F) with proper paste consistency. It keeps its elasticity even in severe temperatures -40°C to +150°C (-40°F to 302°F).

FUNCTION Interior and exterior silicon sealant with permanent elasticity LINE SEALANTS Available in neutral and various other colours

INDICATION For the non-toxic and total sealing of any type of material It has not anyway the function of structural adhesive

MATERIALS Natural stone, terrazzo, agglomerates, ceramics, terracotta, concrete, metal, plastics, glass, etc.

HOW TO USE Surface preparation: surfaces that will come in contact with the sealant must be dry, clean and free from dirt, rust, oil, anti-adherent substance, etc. Porous substrate must be prepared by rubbing it by a wire brush and abrasive and then cleaned with a lint-free rag. Use masking tape along edges. Application: apply the sealant with the proper caulking gun. Smooth uncured sealant with dampened tool.

TECHNICAL INFORMATION See page 2 NOTE Contact with some elastomers such as Neoprene, EPDM, and APTK can cause a change in sealant colour. Contact with polyacrylates and polycarbonates can cause tensile stress and consequent tension breakdown.

SAFETY While curing, a total of 4% of methylethylketoxima is released. These vapours should not be inhaled for a long period of time or in high concentration. Work area must have sufficient aeration. In case of contact with eyes or mucous membranes, rinse well with clear water to avoid irritation. Once cured, the gum can be worked without any risk for the health. For more information, see product label or product Safety Data Sheet.

p999.png

Categories:
Related Searchs: